GeN Banner

×

Notice

The forum is in read only mode.

Welcome, Guest

Nordwest & RC600

Starting Issues

×

Site and Forum Software Update

16 Dec 2020

The Joomla and Kunena packages have been updated to the latest versions.

Nordwest & RC600 Forum

Page:
1
2
3
4
5
6
7

TOPIC:

Re: Starting Issues 8 years 5 months ago #5171

Kano Nordi Offline Platinum Member Posts: 1728 Thank you received: 22	Look to your left on the screen User Menu, click Handbooks and Manuals and you can download a Nordie Manual that will give you all the torque settings John

Re: Starting Issues 8 years 5 months ago #5172

Nordwest41 Offline New Member Posts: 14 Thank you received: 0	OK will do cheers

Re: Starting Issues 8 years 4 months ago #5217

Nordwest41 Offline New Member Posts: 14 Thank you received: 0	Hi guys I've finally sorted the bike I managed to get some free time. The hole is actually a drain hole from the spark plug. As not to fill up with water. And I managed to find the water leak it was Are we ready, it was the core plug next to the spark plug

Re: Starting Issues 8 years 4 months ago #5218

Joachim Offline Platinum Member Posts: 1026 Thank you received: 42	rust never sleeps How did you fix it? ciao Joachim

Re: Starting Issues 8 years 4 months ago #5220

Nordwest41 Offline New Member Posts: 14 Thank you received: 0	Well when I actually found out it was a core plug it was straight forward to replace. I just replaced it ,it's just a standard 20mm core plug

Re: Starting Issues 8 years 4 months ago #5223

Joachim Offline Platinum Member Posts: 1026 Thank you received: 42	good to hear. We had 2 others with the same problem at the german forum. Therefore... It seems that they had toubble to get something. But as always they never give a feedback ciao Joachim

Page:
1
2
3
4
5
6
7

Nordwest & RC600

Starting Issues

Time to create page: 0.038 seconds

Powered by Kunena Forum